ZIGZAG
How do we reach that pivotal moment where, despite all our previous experience, we choose to dedicate hundreds of hours in the pursuit of an idea. A concept, or a way of thinking. It's a mystery, for sure.
For me, building a boat is a vehicle for expressing my version of the designs I've seen on the net, on the water and inside my busy head in the middle of the night.
Zig Zag is by no means a thing of beauty. Let's face it !! But here are the reasons why I committed to building it.
1 :- I wanted to go to the lake and have fun sailing.
2 :- I wanted the boat to be stable and safe.
3 :- I didn't want something that costs a bomb to make.
4 :- I'm lazy. So, I wanted a boat that's easy and quick to rig by myself.
A few other bits and pieces came into play as the design evolved, but that's pretty much it.
The main influences on my thinking were the scaw bow cruising boats coming out of Europe at the moment and space they offer.
I liked the absolute simplicity of a Michael Storer design called " OZ Goose “. It's 3.6 x 1.2 metre rectangular boat with a flat bottom and a balanced Lugg rig.
Zig Zag is 4.3 m long and 1.4 m wide with .4 m deep sides. Hinging the rudder on the transom adds another 300mm, making the boat 4.6m overall. To avoid some of the predictable slamming when going to windward, I put a rise on the outer section of the hull. This should also reduce some of the drag.
The 5m mast is stepped 650mm from the bow and has no stays.
The daggerboard case doubles as a seat amidships with loose storage underneath. Behind that is an open section 2.1m long, providing a space for one person to sleep. Buoyancy chambers / seats, 260mm wide, run from the transom to the bulkhead, directly behind the mast. Two more buoyancy chambers continue forward to the very nose of the boat.
These chambers create two box beams to stiffen the lightweight 6mm plywood construction. Stringers of 25 x 25 mm white cedar form the internal corners of the box beams and plywood bulkheads further divide that space.
In total, there is 750ltrs of sealed buoyancy in the boat. The hollow, square section mast also floats.
Construction: -
First step was to carve a one tenth scale model in timber of a shape I felt happy with. Vernier callipers then helped me set out the full sized, plywood components.
I pinned and glued the scarf joined ply to the stringers and reinforced every corner with epoxy fillets.
The step for the mast is combined with the main bulkhead and is very strong.
Where needed, the hull was given a skin of fibreglass and some fairing compound to smooth out a few lumps and bumps.
Then came the standard bits and pieces, like the rudder assembly, daggerboard, mast and spars.
I drew a sail I thought would not over power the boat and sent the drawing off to (Really Simple Sails) to be made.
Launch day for Zig Zag was short lived due to a leak beside the daggerboard case. Once that was fixed the basic little boat has performed beyond expectations.
Easy to rig, launch and sail.
Mark Heaton
